Home > Warewashing > Sinks, Dishtables
Sinks, Dishtables
Sort By:
Page of 19
HSA-10-FE
(HSA-10-FE) Hand Sink - Eagle Group
ea.

Hand Sink, wall mount, 13-1/2" wide x 9-3/4" front-to-back x 6-3/4" deep bowl, 304 stainless steel construction, electronic eye gooseneck spout, basket drain, deep-drawn positive drain sink bowl, 7-1/2" high backsplash, all welded, includes mounting brackets, inverted "V" edge, NSF
HSA-10-F
(HSA-10-F) Hand Sink - Eagle Group
ea.

Hand Sink, wall mount, 13-1/2" wide x 9-3/4" front-to-back x 6-3/4" deep bowl, 304 stainless steel construction, splash mount gooseneck faucet, basket drain, deep-drawn seamless design-positive drain, inverted "V" edge, NSF
1B184-2D18
(1B184-2D18) Sink - John Boos
ea.

Sink, (1) 18"W x 18" front to back x 14"deep compartments, (2) 18" drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF
E1S8-1824-14R24
(E1S8-1824-14R24) E-Series Compartment Sink - John Boos
ea.

E-Series Compartment Sink, (1) 18"W x 24" front-to-back x 14"deep compartments, (1) 24" right drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2 dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF
1B18244-2D24
(1B18244-2D24) Sink - John Boos
ea.

Sink, (1) 18"W x 24" front to back x 14"deep compartments, (2) 24" drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF
3B16204-2D18
(3B16204-2D18) Sink - John Boos
ea.

Sink, (3) 16"W x 20" front to back x 14"deep compartments, (2) 18" drainboards, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF
2B16204-1D18L
(2B16204-1D18L) "B" Series Sink - John Boos
ea.

"B" Series Sink, 2-compartment, 54"W x 25-1/2"D, 16/300 stainless steel construction, 16" side-to-side x 20" front-to-back x 14" deep bowls, (1) 18" drainboard on left, 10"H boxed backsplash, 8" O.C. splash mount faucet holes, 3-1/2" diameter die-stamped drain openings, stainless steel gussets, legs, crossbracing, & adjustable bullet feet, NSF, CSA®
E1S8-1824-14
(E1S8-1824-14) E-Series Compartment Sink - John Boos
ea.

E-Series Compartment Sink, (1) 18"W x 24" front-to-back x 14"deep compartments, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2 dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF
E1S8-1824-14L24
(E1S8-1824-14L24) E-Series Compartment Sink - John Boos
ea.

E-Series Compartment Sink, (1) 18"W x 24" front-to-back x 14"deep compartments, (1) 24" left drain board, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2 dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF
1B16204-1D18L
(1B16204-1D18L) Sink - John Boos
ea.

Sink, (1) 16"W x 20" front to back x 14"deep compartments, (1) 18" left drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF