Home > Warewashing
Warewashing, Sinks
Sort By:
Page of 11
1524B RL-30 B-0133
Cutlery Bin, 21" x 12" x 4", 4 compartment, stackable, black, made in USA, high density polyethylene, FDA approved (sold in master case only - 12 each) Undercounter Dishwasher, 3.5kw built-in booster, approximately 30 racks/hour cap., auto fill, 2.8kw tank heater, pumped drain, continuous wash cycle, (1) plate & (1) flat rack, stainless steel interior & exterior, TempGuard™ final rinse temp control, thermostatic controls, 1 HP wash motor, ENERGY STAR® EasyInstall Pre-Rinse Unit, wall mount, base faucet, spring check cartridges & lever handles, 2" diameter flanges with 1/2" NPT female eccentric flanged inlets, 35-1/2"H, 15" overhang, 8-1/4" clearance, 18" riser, spray valve, flex stainless steel hose
300 HSA-10-FE HSA-10-F
Disposer, basic unit only, 3 Hp motor, single support leg, heat treated aluminum alloy housing Hand Sink, wall mount, 13-1/2" wide x 9-3/4" front-to-back x 6-3/4" deep bowl, 304 stainless steel construction, electronic eye gooseneck spout, basket drain, deep-drawn positive drain sink bowl, 7-1/2" high backsplash, all welded, includes mounting brackets, inverted "V" edge, NSF Hand Sink, wall mount, 13-1/2" wide x 9-3/4" front-to-back x 6-3/4" deep bowl, 304 stainless steel construction, splash mount gooseneck faucet, basket drain, deep-drawn seamless design-positive drain, inverted "V" edge, NSF
GW-40 B-0113 DH-5000-VHR
BarMaster Glasswasher, automatic, chemical sanitizing, (40) 20" x 20" racks per hour, auto fill, wash, drain & rinse cycles, electromechanical controls, multiple cycles, EZ-Clean™ wash & rinse arms, door safety switch, side panels, stainless steel frame, legs & adjustable bullet feet, 1 HP wash motor, NSF, ETL EasyInstall Pre-Rinse Unit, spring action gooseneck, single hole base faucet, 18" flex. stainless steel supply lines with comp. fittings for 5/8" OD copper tubing, 45"H, 14" overhang, 19-3/8" clearance, 24" riser, spray valve, stainless steel hose Genesis Dishwasher, door type, high temperature, ventless heat recovery system, built-in sentry (70° rise booster), field convertible from straight through to corner, field convertible from three phase to single phase, auto start when hood is closed, single point electrical connection, 1 HP self draining pump & motor, NSF approved 37 racks per hour, automatic tank fill, detergent/chemical connections, interchangeable upper and lower spray arms, cold water feed only, automatic drain valve, lighted bottom mounted digital controls, mounted water PRV, sloped hood, NSF, cULus, ENERGY STAR®
PR314151 1B184-2D18 E1S8-1824-14R24
Camrack® 9 x 9 Peg Rack, full size, 19-3/4" x 19-3/4" x 4", compartment inches 18" x 18", 2-5/8" max. height, soft gray, NSF Sink, (1) 18"W x 18" front to back x 14"deep compartments, (2) 18" drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF E-Series Compartment Sink, (1) 18"W x 24" front-to-back x 14"deep compartments, (1) 24" right drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2 dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF
1B18244-2D24 3B16204-2D18 2B16204-1D18L
Sink, (1) 18"W x 24" front to back x 14"deep compartments, (2) 24" drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF Sink, (3) 16"W x 20" front to back x 14"deep compartments, (2) 18" drainboards, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF "B" Series Sink, 2-compartment, 54"W x 25-1/2"D, 16/300 stainless steel construction, 16" side-to-side x 20" front-to-back x 14" deep bowls, (1) 18" drainboard on left, 10"H boxed backsplash, 8" O.C. splash mount faucet holes, 3-1/2" diameter die-stamped drain openings, stainless steel gussets, legs, crossbracing, & adjustable bullet feet, NSF, CSA®
E1S8-1824-14 E1S8-1824-14L24 1B16204-1D18L
E-Series Compartment Sink, (1) 18"W x 24" front-to-back x 14"deep compartments, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2 dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF E-Series Compartment Sink, (1) 18"W x 24" front-to-back x 14"deep compartments, (1) 24" left drain board, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2 dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF Sink, (1) 16"W x 20" front to back x 14"deep compartments, (1) 18" left drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF
3B16204-1D18L E3S8-1824-14R24 E3S8-1824-14T24
Sink, (3) 16"W x 20" front to back x 14"deep compartments, (1) 18" left drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF E-Series Compartment Sink, (3) 18"W x 24" front-to-back x 14"deep compartments, (1) 24" right drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF E-Series Compartment Sink, (3) 18"W x 24" front-to-back x 14"deep compartments, (2) 24" drainboards, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF
1B16204-1D18R 1B18244-1D24R 3B16204-1D18R
Sink, (1) 16"W x 20" front to back x 14"deep compartments, (1) 18" right drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF Sink, (1) 18"W x 24" front to back x 14"deep compartments, (1) 24" right drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF Sink, (3) 16"W x 20" front to back x 14"deep compartments, (1) 18" right drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF
2B16204-1D18R FR258151 PR59314151
"B" Series Sink, 2-compartment, 54"W x 25-1/2"D, 16/300 stainless steel construction, 16" side-to-side x 20" front-to-back x 14" deep bowls, (1) 18" drainboard on right, 10"H boxed backsplash, 8" O.C. splash mount faucet holes, 3-1/2" diameter die-stamped drain openings, stainless steel gussets, legs, crossbracing, & adjustable bullet feet, NSF, CSA® Camrack® Flatware Rack, full size, 19-3/4" x 19-3/4" x 4", 2-5/8" max. height, soft gray, NSF Camrack® 5 x 9 Peg Rack, full size, 5 spacing & 9 spacing configuration, will hold 10" deep dish plates or pasta & soup bowls, smooth sides, round corners, ergonomic handles, 2-5/8" max. height, soft gray, NSF
B6C-18 314-16-3-18L 314-16-3-18R
1800 Series Underbar Sink Unit, 3-compartment, 72"W x 20"D x 33-1/2"H, 304 stainless steel construction, 10" wide x 14" front-to-back x 10" deep seamless deep-drawn compartments, 18-1/2" drainboards on left & right, 4-1/2"H backsplash, bullnose front edge, 4" O.C. splash mount faucet with 10" spout, includes 1-1/2" drains & removable overflow standpipes, galvanized steel back & end panels, galvanized steel legs with adjustable bullet feet, NSF 314 Series Sink, 3-compartment, 74-3/8"W x 27-1/2"D, 304 stainless steel construction, 16" side-to-side x 20" front-to-back x 13-1/2" deep seamless deep-drawn compartments, 18" drainboard on left, 9-1/2"H backsplash with 1" upturn & tile edge, 2" euro-style edges on front & sides, 8" O.C. faucet holes, 3-1/2" basket drains with 1-1/2" I.P.S drain outlets, 12-gauge leg gussets, galvanized steel legs & side crossrails, adjustable bullet feet, NSF 314 Series Sink, 3-compartment, 74-3/8"W x 27-1/2"D, 304 stainless steel construction, 16" side-to-side x 20" front-to-back x 13-1/2" deep seamless deep-drawn compartments, 18" drainboard on right, 9-1/2"H backsplash with 1" upturn & tile edge, 2" euro-style edges on front & sides, 8" O.C. faucet holes, 3-1/2" basket drains with 1-1/2" I.P.S drain outlets, 12-gauge leg gussets, galvanized steel legs & side crossrails, adjustable bullet feet, NSF